Hello, we use also this plugs. Here a photograph. This plugs was home made.
Bye
Alexandre
| Dateianhänge: |
|
DSC00051.jpg [ 12.21 KiB | 6249-mal betrachtet ] |
| Pressluftjunkies.net http://forum.pressluftjunkies.net/ |
|
| 'Breaking' Air Lines http://forum.pressluftjunkies.net/viewtopic.php?f=4&t=251 |
Seite 1 von 1 |
| Autor: | Michael Hims [ 18. Mai 2007, 20:38 ] |
| Betreff des Beitrags: | 'Breaking' Air Lines |
Hi, Apologies for the English post.. Could someone please explain how air lines are joined together so they can be pulled apart when the sub is opened up? Cheers, Michael |
|
| Autor: | Andy Jungmann [ 19. Mai 2007, 00:35 ] |
| Betreff des Beitrags: | |
Hi Michael, don't worry about the language. Well, I'm not sure if this is the right type. But we use some kind of quick-release coupling from Festo. I guess there will be other brand on the marked. Pictures are simbolical. As I said, I'm not sure if this is the right type or size. Regards Andy |
|
| Autor: | Alexandre Gillon [ 19. Mai 2007, 09:00 ] | ||
| Betreff des Beitrags: | |||
Hello, we use also this plugs. Here a photograph. This plugs was home made. Bye Alexandre
|
|||
| Autor: | Michael Hims [ 19. Mai 2007, 10:22 ] |
| Betreff des Beitrags: | |
Andy, I was thinking about using those but you have to retract the outer sleeve in order to separate them which I can't really see a way around.... Alexandre, What pressure have you tested them at? Cheers, Michael |
|
| Autor: | Andy Jungmann [ 19. Mai 2007, 12:21 ] |
| Betreff des Beitrags: | |
Michael, you mean the connectors inside the boat? We use the one on Alexandre's picture. They all are self mate. I don't know how much pressure, but it will be good for about 10 bar I guess. Anyway, they work great in our boats. Regards Andy |
|
| Autor: | Alexandre Gillon [ 19. Mai 2007, 13:30 ] |
| Betreff des Beitrags: | |
Hello, I use at 7 bar. Regads |
|
| Seite 1 von 1 | Alle Zeiten sind UTC + 1 Stunde [ Sommerzeit ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|