Pressluftjunkies.net http://forum.pressluftjunkies.net/ |
|
Rückschlagventil http://forum.pressluftjunkies.net/viewtopic.php?f=4&t=141 |
Seite 1 von 1 |
Autor: | Alexandre Gillon [ 30. Oktober 2006, 22:34 ] | ||
Betreff des Beitrags: | Rückschlagventil | ||
Hello, On the circuit of compressed air, the snorkel has its reserve of air. A valve with no return makes close the circuit when the principal reserve is empty. I had a valve from Festo: H-M5 (3671). The problem is when the pressure in the principal reserve drops slowly; the valve is not closed because the pressure doesn’t move the valve. The reserve of the Snorkel is emptied and it does not open! I need a valve with spring to close the system. I made a valve with a valve of car. It is very easy to make and low cost. The spring is in stainless steel and the body in brass. Here photograph. Goodbye Alexandre
|
Seite 1 von 1 | Alle Zeiten sind UTC + 1 Stunde [ Sommerzeit ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |