| Dateianhänge: |
|
P1710_PressureHull.jpg [ 59.11 KiB | 13393-mal betrachtet ] |
| Pressluftjunkies.net http://forum.pressluftjunkies.net/ |
|
| Pressure hull system for Submarine http://forum.pressluftjunkies.net/viewtopic.php?f=11&t=883 |
Seite 1 von 1 |
| Autor: | Lars Norberg [ 22. November 2010, 18:36 ] | ||
| Betreff des Beitrags: | Pressure hull system for Submarine | ||
|
|||
| Autor: | Sascha Hornbach [ 23. November 2010, 22:56 ] |
| Betreff des Beitrags: | |
Hi Lars, there are a few drawings. The problem is that the people invest very much time in this drawings. So we all have make the expirience that some people only collect nice drawings and never build a sub. Years ago we found drawings in Ebay.... I hope you see the reasons because we not share so easily plans and drawings. My offer is, post some pics or drawings from your sub. So the people can see that you bild something, that you are "trustable" if you want. Please note EVERYONE here will help you in any questions and we share knowlage, but we also very careful. best regards Sascha |
|
| Autor: | Lars Norberg [ 24. November 2010, 00:14 ] |
| Betreff des Beitrags: | |
| Autor: | Lars Norberg [ 24. November 2010, 00:22 ] |
| Betreff des Beitrags: | SSN-688 Los Angeles Class |
This are som screendumps of the drawings so far. |
|
| Autor: | Lars Norberg [ 24. November 2010, 00:24 ] |
| Betreff des Beitrags: | |
| Autor: | Lars Norberg [ 24. November 2010, 00:27 ] |
| Betreff des Beitrags: | Main ballast tank (This have to make new:( ) |
| Autor: | Sascha Hornbach [ 24. November 2010, 00:51 ] |
| Betreff des Beitrags: | |
Aahh ok that looks very nice! I think I could help you. Let me ask somebody because of the drawings. I will let you know soon. best regards Sascha |
|
| Autor: | Andy Jungmann [ 24. November 2010, 12:26 ] |
| Betreff des Beitrags: | |
Hi Lars, first of all welcome to this site. Sascha told you the reason why we are very hesitant in giving away digital drawings, no matter if 2D or 3D. But we will be supportive all the time. A digital medium can be reproduced with no loss in quality. There are a lot of people (Ferengies) out there who wants to make profit with work of others. So feel free to ask any question you want. There is no secret in this system. And some of us are very experienced in building compressed air submarines. In your initial post you show a drawing of the Beluga (Projekt 1710). Wait, that's my drawing... Anyhow. What do you want to know about the main ballast tank? Best regards Andy |
|
| Autor: | Lars Norberg [ 24. November 2010, 12:49 ] |
| Betreff des Beitrags: | |
| Autor: | Lars Norberg [ 26. November 2010, 11:54 ] |
| Betreff des Beitrags: | Gasket |
| Autor: | Andy Jungmann [ 26. November 2010, 13:13 ] | ||
| Betreff des Beitrags: | |||
|
|||
| Autor: | Lars Norberg [ 26. November 2010, 14:03 ] |
| Betreff des Beitrags: | |
| Autor: | Andy Jungmann [ 26. November 2010, 14:17 ] |
| Betreff des Beitrags: | |
| Autor: | Lars Norberg [ 26. November 2010, 15:04 ] |
| Betreff des Beitrags: | |
| Autor: | Andy Jungmann [ 26. November 2010, 15:56 ] |
| Betreff des Beitrags: | |
| Autor: | Lars Norberg [ 11. Dezember 2010, 12:00 ] | ||||
| Betreff des Beitrags: | Input? | ||||
|
|||||
| Autor: | Sascha Hornbach [ 14. Dezember 2010, 23:49 ] |
| Betreff des Beitrags: | |
| Autor: | Lars Norberg [ 15. Dezember 2010, 00:10 ] |
| Betreff des Beitrags: | |
| Autor: | Sascha Hornbach [ 15. Dezember 2010, 00:17 ] |
| Betreff des Beitrags: | |
| Autor: | Lars Norberg [ 15. Dezember 2010, 09:34 ] |
| Betreff des Beitrags: | |
| Autor: | Andy Jungmann [ 15. Dezember 2010, 15:37 ] |
| Betreff des Beitrags: | |
| Seite 1 von 1 | Alle Zeiten sind UTC + 1 Stunde [ Sommerzeit ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|